Aircraft Configurations
Aircraft configurations define the operational parameters for each plane at your dropzone. When creating loads, you select an aircraft configuration, and it determines the weight limits, passenger capacity, and revenue requirements for that load.
What Is an Aircraft Configuration?
An aircraft configuration links a specific aircraft (identified by tail number and model) to a set of operational parameters. The same physical aircraft can have multiple configurations — for example, a "Standard" configuration for normal operations and a "Reduced capacity" configuration for training days.
Configuration Settings
Each configuration includes:
Identity
- Name — A label for this configuration (e.g. "Standard", "Summer config").
- Aircraft — The physical aircraft (tail number and model).
Weight & Capacity
- MTOW (Maximum Takeoff Weight) — The maximum total weight of the aircraft including fuel, crew, and passengers, in pounds (lbs). The loading board uses this to track weight limits.
- Empty weight — The weight of the aircraft without passengers or payload (lbs).
- Min passengers — The minimum number of jumpers for a load to be viable.
- Max passengers — The maximum number of jumpers the aircraft can carry.
Flight Performance
- Climb speed (empty / full) — How fast the aircraft climbs when empty or at maximum payload, in feet per minute. The system interpolates between these two values based on actual load weight. Used to estimate flight time for a given exit altitude.
- Descent speed — How fast the aircraft descends after the last jumper exits, in feet per minute.
- Jump run time — The time spent on the jump run (the level portion of flight where jumpers exit), in seconds.
These performance values allow the system to calculate estimated flight times before the load departs. For example, if jumpers exit at 13,000 ft with a climb speed of 1,000 ft/min, descent speed of 2,000 ft/min, and a 3-minute jump run, the estimated flight time would be approximately 22.5 minutes (13 min climb + 3 min jump run + 6.5 min descent).
Fuel Consumption
Fuel consumption is configured per flight phase, allowing more accurate fuel tracking than a single flat rate:
- Taxi time — Fixed time in seconds added to every load for ground taxiing.
- Taxi fuel rate — Fuel consumption during taxi, per hour.
- Climb fuel rate — Fuel consumption during climb, per hour.
- Cruise fuel rate — Fuel consumption during the jump run (cruise) phase, per hour.
- Descent fuel rate — Fuel consumption during descent, per hour.
The system uses these rates together with the flight performance values to estimate how much fuel each load will burn. This estimate is shown on the loading board before and during the flight.
When a load lands, the operator can record the actual fuel consumed alongside the flight time. Once recorded, the actual value replaces the estimate in fuel tracking and the fuel timeline.
Turning Fuel Tracking Off
Fuel tracking is on by default, but it can be switched off for your whole organization if you do not track aircraft fuel in Paraportal. When it is off:
- The fuel column disappears from the loading board, and refuels can no longer be added to the day's timeline.
- Landing a load no longer asks for the fuel consumed, and the finalization page drops the same field.
- Fuel is left out of a load's total weight, so the remaining weight shown is purely aircraft, crew and jumpers.
- The fuel consumption settings above are hidden from aircraft configurations. Taxi time stays visible, because it affects estimated flight time rather than just fuel.
Nothing is deleted. Refuels and recorded fuel burns stay in the system and reappear exactly as they were if fuel tracking is switched back on.
This setting is currently changed by Paraportal support rather than from the settings pages. Contact us if you would like it turned off for your dropzone.
Revenue Threshold
The revenue threshold sets a minimum revenue target for each load. If total passenger revenue falls below this amount, the shortfall is distributed as an additional charge among passengers. This ensures each flight covers its operating costs.
The threshold is calculated from two components:
Threshold = Base + (Per-minute price × Flight minutes)
- Base amount — A fixed minimum revenue per load (net, before VAT).
- Per-minute flight price — An additional amount per minute of flight time (net, before VAT).
- VAT rate — The tax rate applied to shortfall charges.
Setting both components to zero disables the revenue threshold for that configuration.
Example 1: Fixed cost only
A configuration with:
- Base: 300 EUR
- Per-minute price: 0 EUR
Every load with this configuration must generate at least 300 EUR in passenger revenue, regardless of flight time.
If a load has 3 passengers whose tickets total 240 EUR, there's a shortfall of 60 EUR. This 60 EUR is distributed proportionally among passengers based on their ticket prices:
- Passenger A (ticket: 100 EUR) pays an extra 25.00 EUR (100/240 × 60)
- Passenger B (ticket: 80 EUR) pays an extra 20.00 EUR (80/240 × 60)
- Passenger C (ticket: 60 EUR) pays an extra 15.00 EUR (60/240 × 60)
Example 2: Fixed cost + flight time
A configuration with:
- Base: 100 EUR
- Per-minute price: 10 EUR
For a 20-minute flight, the threshold is 100 + (10 × 20) = 300 EUR. For a 15-minute flight, the threshold is 100 + (10 × 15) = 250 EUR.
This model better reflects the actual cost of operating the aircraft — longer flights to higher altitudes cost more fuel and engine time, so the threshold scales accordingly.
Example 3: Flight time only
A configuration with:
- Base: 0 EUR
- Per-minute price: 15 EUR
For a 20-minute flight, the threshold is purely time-based: 15 × 20 = 300 EUR.
How Shortfall Distribution Works
When total passenger revenue falls below the threshold:
- The shortfall is calculated: threshold minus total passenger revenue.
- Passengers with zero-cost tickets (e.g. crew members or comped jumpers) are excluded from the distribution.
- The shortfall is split proportionally among remaining passengers based on the ratio of their ticket price to the total revenue.
This means passengers paying more for their jump (e.g. higher altitude) absorb a proportionally larger share of the shortfall, which keeps the distribution fair.
Before finalization, the loading board shows each passenger's estimated shortfall amount so there are no surprises. If the load fills up and revenue exceeds the threshold, the shortfall drops to zero.
Managing Configurations
Aircraft configurations are managed from the Aircraft Configurations settings page. You can:
- Create a new configuration by selecting an aircraft and filling in the parameters.
- Edit an existing configuration to adjust capacity, weight limits, or revenue thresholds.
- Delete a configuration that is no longer needed (loads already created with it are not affected).